1. Unknown Usb Device Driver Download
2. Texa Usb Devices Driver Update
3. Usb Driver Device Manager
4. Texa USB Devices Driver

This should expand the USB devices. Locate the Texas Instruments Graphing Calculator driver. If the item is listed as anything other then Texas Instruments SilverLink (USB GraphLink) Cable and or TI Educational Handheld Device, it will need to be updated. If the driver needs to be updated right click on it and choose Update Driver. The STUSB1602 can handle all functions from Type-C attach detection, plug orientation detection, host to device connection, V CONN support, and V BUS configuration. It also provides a USB PD TX/RX line driver and BMC (biphase mark coding) transceiver which allows USB PD negotiation and alternative mode through an external MCU.

• November 27, 2020 5.0.1

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 5.0.1	Released November 27, 2020	Type EXE	Filesize 7.5MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added support for DFG/HDMI converter. Added support for Windows 10 Device-Guard.

• February 24, 2020 4.9.0

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 4.9.0	Released February 24, 2020	Type EXE	Filesize 7.4MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed Gamma not working. Fixed Polarization formats PPB1 320x240 creating an error on some CPUs.

• January 31, 2020 4.8.0

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 4.8.0	Released January 31, 2020	Type EXE	Filesize 7.4MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Updated driver's FilterPackage to version with fix for saved Y800 image images being flipped Fixed Tonemapping not working after switching from YUY2 to RGB64 video format.

• November 8, 2019 4.7.0

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 4.7.0	Released November 8, 2019	Type EXE	Filesize 7.4MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added support for polarization cameras. Fixed error on umcompressed Y800 AVI Capture.

• August 22, 2019 4.6.2

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 4.6.2	Released August 22, 2019	Type EXE	Filesize 6.2MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fully reworked image transfer pipeline.

• December 4, 2018 4.5.0

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 4.5.0	Released December 4, 2018	Type EXE	Filesize 6.2MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog General bugfixes.

• November 14, 2018 4.4.0

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 4.4.0	Released November 14, 2018	Type EXE	Filesize 6.2MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Changed the way Directshow time stamps are generated. Fixed force_avg_time_per_frame not fully working for all programs.

• September 13, 2018 4.3.0

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 4.3.0	Released September 13, 2018	Type EXE	Filesize 6.1MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added tone mapping for 8 bit video formats. Fixed Gamma and Saturation saving issue, e.g. Saturation being 0. Fixed an issue with respect to ffmpeg. Fixed hibernate and suspend behavior.

• January 22, 2018 4.2.0

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 4.2.0	Released January 22, 2018	Type EXE	Filesize 6.1MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added Directshow driver property pages for several 33U properties. Fixed Contrast on YUY2/Y411 Improved performance of Tonemapping Fixed very rare Bluescreen

• October 17, 2017 4.1.0

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 4.1.0	Released October 17, 2017	Type EXE	Filesize 5.8MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added support for 38U cameras. Faster Pause/Continue. Fixed some stability problems.

• July 5, 2017 4.0.6

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 4.0.6	Released July 5, 2017	Type EXE	Filesize 5.9MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed tone mapping for some camera models.

• May 2, 2017 4.0.4

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 4.0.4	Released May 2, 2017	Type EXE	Filesize 6MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed an OpenCV compatibility issue. Enabled DMK J003 pattern fix.

• February 21, 2017 4.0.2

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 4.0.2	Released February 21, 2017	Type EXE	Filesize 5.8MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Removed unnecessary properties.

• February 9, 2017 4.0.1

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 4.0.1	Released February 9, 2017	Type EXE	Filesize 5.8MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Complete redesign of driver architecture. Signature corrected for Windows 10 AU. Enhanced Tone Mapping.

• August 8, 2016 3.1.0

  Device Driver for all 33U, 37U, 38U series, polarization USB cameras and the DFG/HDMI converter.
  Version 3.1.0	Released August 8, 2016	Type ZIP	Filesize 2.4MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog First release

Contrary to what many say, the Palm Desktop will work on the new Windows operating systems, Vista, Windows 7, 8 and 10, with either the 32 or 64 bit OS. If you have the 32 bit OS then do not install the driver below as it is not necessary. If you have the 64 bit OS you will need the driver below and once it is installed your Palm will hotsync with your computer just as previous systems. To find out if you have the 32 or 64 bit OS please use the link below;

We can arrange to dial into your computer and install the required driver remotely, the typical fee for this service is $35 for the first 30 minutes, please see our PalmDr Phone Service for details and available hours.

1. If your USB device does not work the most likely problem is missing or outdated drivers. When you plug the device into your USB, Windows will look for the associated driver, if it cannot find this driver then you will be prompted to insert the driver disc that came with your device. Common USB Device errors are ‘usb port not working.
2. Here you can download: brochures, official certifications, screen saver TEXA and traditional TEXA calendar illustrated by Milo Manara and also the exclusive Download Manager and OBD LOG PC SW SUITE softwares.

The ACEECA corporation has developed a 64 bit driver for their handhelds, running the Palm OS, so the instructions refer to an Aceeca device/PDA – just ignore this labeling and know they mean the Palm device. This driver is only necessary for the USB driver, it is not necessary for the BlueTooth(BT), Infra Red(IR), WiFi, or serial.

1) Install the Palm Desktop software from the CD as normal. You must have the Palm Desktop software installed before installing the 64 bit drivers. If you do not have the installation CD you can order one from our website here;
Install CDs

2) Download 64 bit driver instructions from the link below.
Windows 64 Bit Insturctions

3) Download the 64 bit drivers, this is a Zip file so you must extract it to a place you can later find;
Windows 64 Bit Drivers Download

For more information read the following link;
http://forum.brighthand.com/palm-tx/281989-how-install-new-aceeca-64bit-drivers-tx.html

Windows 8 and 10

With Windows 7, 8 and 10 you should be use the 6.2 version of the Palm desktop in most cases. The installation is the same for Windows 7, 8 and 10, if you run into a problem of only seeing the Media in the Palm Desktop then you must be sure to start the Hotsync Manager and Palm Desktop with the “Run as administrator”.

These instructions are a work in progress so an changes/problems will greatly help others with the same problems so please reply with feedback, good or bad.

Thank you,
Chris Short, President
Short Tronics, INC.
www.PalmDr.com

This works on my old palm zire and is not only for win 7 or 8 , works on my win 10 great

with your perfectly clear instructions and the drivers my 'museum-Z22' can be perfectly backed up again. This is part of not having planned obsolescence. Thank you so much

The instructions refer to Win7 only, so there's a bit of 'interpretation' required when installing on Win10. The last two pages contain the critical information.
The new drivers work; that's a plus. The suggested v6.2 desktop is lacking in a few areas such as calendar entry colors and other niceties that exist in v4.1.
Palm T|X being used.

Thank You Very much !!!) You can give me a hope, what good hardcore programmers ALIVE !!!)))) PALM FOREVER!!)))

Perfect! I had forgotten windows 7 and the palm Zire 31 didn't exactly see eye to eye.
Glad I found this solution! It works flawlessly! I got the palm up and running again specifically because i wanted the computer/handheld interface

Unknown Usb Device Driver Download

Like so many others, I love my Palm Pilot and have used one since 1997. With Windows OS constantly updating, I keep worrying that I will eventually have to give it up, but alas, your website helped me continue to use it. I love that I don't have all of my private info and passwords in my phone or in the cloud. This week I loaded windows 10 64 bit and tried to install my palm pilot with no success.
I did all that you said in this post, but then I couldn't get my palm information to show in the Palm Desktop. After some research, I found the link to this website to provide a 'patch' for legacy Palm Pilots (Tungsten C). Then all of the data showed up in my Desktop again. Yay!!!
http://www.pimlicosoftware.com/legacy.html
This is what the website says...
When most of the other Palm OS vendors dropped out of the market, Palm rewrote their PIM applications and came out with a new internal architecture that was not fully compatible with Palm OS applications written for the earlier generation devices. We refer to the older devices as Legacy devices. Here is a list of specific devices which fall into each category:
Legacy Devices: any device running OS4 or earlier, any non-Palm brand handheld (Sony, Garmin, etc.), or Treo-600, Tungsten C/T/T2, Zire-71
Newer Devices: any Treo model except Treo-600, Tungsten T3/T5/Tx/LifeDrive, Zire 72/31

Amazing. Worked like a charm. Thank you for all you do!!

This procedure has worked perfectly with my Palm Zire 22 which is legacy model from the past. I thought I would never get the data transferred but it has worked perfectly with Windows 10. Thanks so much....

Well...I confess: I am a PALM orphan.
And as technology 'improves' - in all connected and virtual and cloud ways - I still remember my days when I just could 'access' a Contact detail in my PALM handheld without worried 'if' I'll have a wifi OR 3/4/4.5/4+/5G connection (of my 'smartphone').
In very special when I am visiting Industrial customers in the countryside, and also want to use my (old, I know!) IAMBIC solutions.
YEARS has gone and I still keep my 2 PALM Centros, and 1 Zire 71 in a hope that, 'one day', I could sync it with my 64bits computers.
So... I want to really THANK YOU very, very, very much to make it possible!: PALM OS HotSync is up and running on my Desktop Windows 7 64bits.
(I will do the same procedure to my notebooks Windows 10).
My very best regards!
Marcos Luiz S. Filho
(from Brasil)

Thanks so much, PalmDr! Saved everything!
Previous Palm desktop on Windows 7 and Hard Drive crashed.
Now wrestling with Windows 10, more ways than this!
Loaded version 6.2, but with W10, unit did not connect to laptop at all, so 1st windows of Aceeca instructions never appeared. Launched Device Mgr, but NO 'Other devices' in list. After many head scratches, I found 'Show Hidden Devices' under VIEW, and there it was. Then 64 bit Drivers then installed easily as per the instructions, and Hot Sync worked perfectly.
Great service!

Texa Usb Devices Driver Update

Usb Driver Device Manager

Texa USB Devices Driver